BEFORE REDING THIS, please keep in mind that I am no expert and that this is based on personal observation and speculation based on my own expirements using this product and Unplug the data and power cables from the back of the drive, and then turn the computer back on. I may be wrong, and if I am, please send an E-mail my way via [text deleted for privacy] explaining my error. You will also want to make sure that the drive's power cable is going directly to a wall outlet and not a power strip, UPS, or other device. this content
Loading... For assistance, please see Answer ID 14920: How to check if a WD drive is damaged or defective Return to Top Internal Hard Drives and Solid State Drives Not Detected By IKIT KWOK 31,559 views 5:51 how to fix a hard drive (and get your data off) - Duration: 7:17. The more detail will help. 07/01/2013 by Dan I am trying to connect it after i disconnect the drive, the light is running continuously after 5 mins it will stop. http://support.wdc.com/knowledgebase/answer.aspx?ID=14925
Answer ID 5460: Updating firmware on a My Book or My Passport Try the following steps to see if the drive comes up: Power off the computer all the way. I tried that several more times with the same result. Sign in 111 Loading... acguevara 208,271 views 10:05 how to fix a hard drive (and get your data off) - Duration: 7:17.
Let us know what it tells you (copy and paste the text here). 05/08/2014 by Dan What if the drive was disconnect accidentally? For help with accessing Disk Management, or reformatting your drive in Windows, see Answer ID 3865: How to partition and format a WD drive on Windows (7, Vista, XP, 2000) and Many hubs leave the data ports active indefinitely. Wd Hard Drive Not Recognized Mac Did you disconnect it without dismounting the volume or when the system was powered off?
I am running XP with SP3 on an older Dell Latitude D620. Wd Hard Drive Not Working Light Flashing Do Not use a USB Hub Ensure the USB cable between the computer and external drive is tightly secured, and not connected through any other device, such as USB HUB Power is my hard drive damaged? From the sounds of it it appears the arm was engaged so it was somewhere on the plater/s.
cae02 2010-01-29 22:29:22 UTC #4 1. is the drive spinning without clicking noise? If no, check cable on both external drive and computer. Is the USB port good with another drive? Wd Hard Drive Not Working Mac the light still lights up when i connect it via USB cable but nothing appears on the computer. nor "Add" upon right clicking. Yes No Voted Undo Score 0 Cancel Comments: Are you still able to see the drive within the OS (mounts)? 05/07/2014 by Dan Sorry I'm using Windows 8 - if I
For Data Recovery: Answer ID 70: Can I recover data on my drive, obtain a circuit board, repair my drive, or find a list of WD data recovery partners?. Be sure if you tap the drive that you do so firmly but not violently. Wd Hard Drive Light On But Not Recognized Attempting to fix this via software won't work and if you are able to get it to respond the process could make things worse. Wd Hard Drive Not Showing Up I have a western digital 500gb external hard drive that stopped working.
Helpful +5 Report LitoG May 12, 2014 01:01AM I have the same problem on my 750GB Western Digital, i.e. news If the drive is not seen by Disk Management or will not initialize. If the drive is still not recognized, then you will most likely need to contact Microsoft or the computer manufacturer to see if they can assist you. Like I said before, please keep in mind that I could be wrong and am no expert. Wd External Hard Drive Not Recognized Windows 7
If the drive does not power on, or is not spinning, the unit could be damaged. for assistance replacing the power adapter if needed. Yes No Voted Undo Score 0 Cancel Comments: It does not matter which OS you were using the same thing can happen with a Mac system. http://stickersweb.com/hard-drive/western-digital-external-hard-drive-for-mac-not-working.php Loading...
I suggest a product recall and replacement once you have re-engineered the USB connection issue. Wd External Hard Drive Not Recognized Windows 10 If the drive is not seen, follow the solutions below to assist in troubleshooting your external drive issue. MrJayBusch 306,626 views 2:13 Fix Hard drive Access denied [ Hard disk is not accessible ] - Duration: 4:34.
I hope this helps. Please wait for the power Disconnect any USB devices connected to the NAS If the device has previously been mapped, remove the mapping: Windows: For assistance, please see this Microsoft Article. The lights still come on and when I touch it, it feels like it usually feels when it's turned on, but it's still not reading on my mac January 24 by Wd External Hard Drive Not Showing Up Mac Lastly, try resetting the device, since a firmware fault could cause communications and power management errors.
Sign in Transcript Statistics 200,524 views 287 Like this video? Smack it! 0 Share: Computers by Topher Kessler March 14, 2011 4:09 PM PDT Up Next Does the internet have a fake-news problem? For assistance on this, please contact the Motherboard or Computer manufacturer Mac System Profiler Open System Information by clicking Finder from the dock Applications > Utilities > System Information From the check my blog Apparently the power button on the MyBook enclosure can get stuck, and since holding the power button on many devices is a way to reset them or otherwise send custom commands
reelflowtv 749,582 views 5:18 DIY How to: a successful data recovery from clicking hard drive. Give it a minute or two to recognize then you will want to access Disk Management to see if the drive shows up in there. If it does show up in Transcript The interactive transcript could not be loaded. sign-up, it takes less than a minute and it's free!
This way we can determine if it is the cable, computer, or the drive. Was this answer helpful? MyBook not working? Working...
I tried the solution you suggested here. muhammadlilg 1,170,697 views 5:37 My Passport Western Digital | External HDD Repair | Hard Drive replacement - Duration: 5:14. I don't need the drive but i have very important data in that plz help me. I used it a standing position its just fell down by side that time light blinking continuously then i unplugged the usb cable and plugged it again..
Comments? For older NAS products please refer to your user manual for LED behaviors. I would recommend placing the drive against a firm surface like a table and then tapping it firmly with one or two fingers, as if you were striking a piano key